Individual ISOBUS retrofitting with clever modules integrates vehicles that have not previously complied with the ISOBUS standard into modern agricultural management as required.
ISO FIT basic kit
The basic version ISO FIT Basic Kit is an ISOBUS retrofit in OEM quality and comes with an ISOBUS rear plug and an ISO InCab plug. An integrated terminating resistor provides a consistent resistance level for error-free CAN Bus communication between the tractor and the implement, according to ISO 11783. The ISO FIT Basic Kit can be individually extended at any time by the ISO FIT front plug.
A vehicle-specific ISO FIT kit is available for the Fendt Vario 200 VFPS – S3 as a retrofit for ISOBUS implements.
ISO FIT Front Plug
The ISO FIT front plug is available for front operation of ISOBUS implements (N sensor, front tank, …). It is simply connected plug & play via two plugs and is immediately ready for use. It can only be used with the ISO FIT Basic Kit.
For some vehicles with factory ISOBUS, special ISO FIT front sockets are available:
- Fendt Vario 700, 800 – COM 3
- Fendt Vario 500, 700 – S4/SCR
- Fendt Vario 800, 900 – S4/SCR
- Fendt Vario 1000 – S4
- Valtra T-Serie Generation 4
ISO FIT Receiver Adapter
The ISO FIT Receiver Adapter allows GNSS receivers (e.g. John Deere StarFire) to be connected to ISO FIT via CAN Bus or a serial port so that the receiver data for the terminal and implements are available. In addition, the Reichhardt steering systems and GREEN FIT can also be integrated into the ISOBUS via this adapter. It can only be used with the ISO FIT Basic Kit.
- Connection of receivers via CAN or serially
- Standardized CAN interface for integrating additional CAN participants
- Provides a power supply
These are the ISO VT by Reichhardt
When choosing ISO VT, it must be ensured that the scope of services is consistent with the planned tasks. Functions that the terminal does not support cannot be selected for the implement. Optionally, the ISOBUS terminal with the largest range of functions can be used for all implements and ideally also for the tractor. The selection offered by Reichhardt covers a wide spectrum and is also tailored to your needs:
T800 – ISO VT
The T800 by Reichhardt is a compact 8.0″ ISOBUS operator terminal with sunlight readable display. The working range can be extended by a main window and an additional display, which allows to display up to two participants at the same time. The operation is possible via touch screen. The scope of delivery also includes the terminal connection cable to the ISO InCab and a holder set. Can be used together with the ISOBUS joystick ISO CONTROL.
T1200 – ISO VT for Smart Farming Applications
The T1200 by Reichhardt is a modern 12.1″ ISOBUS operator terminal. The terminal can be mounted in two positions, allowing at least two displays to be used simultaneously in the working area. In addition to the ISOBUS UT, the ISOBUS TC activation is also included as standard. The scope of delivery also includes the terminal connection cable to the ISO InCab and a bracket set.
T35i – ISO VT
The T35i by Reichhardt is a compact 5.6” ISOBUS control terminal with a sunlight-readable display in VGA resolution for brilliant colors. The foil front is equipped with softkeys and a rotary encoder. Operation is possible via the touchscreen or the softkeys. The scope of delivery also includes the terminal connection cable to the ISO InCab and a mounting set. Can be used jointly with the ISOBUS joystick ISO CONTROL.
T50i –ISO VT for Smart Farming applications
The T50i from Reichhardt is a modern 8.4” ISOBUS operator terminal. The touchscreen with scratch-resistant, anti-reflective VGA color display delivers perfect colors. The scope of delivery also includes the terminal connection cable to the ISO InCab and a mounting set. Ergonomic single hand operation.